What’s that Rotten Egg Smell??

Leaving water with sulfur content in a water heater can cause rotten egg odor.

11 steps to “Fresh Hot Water”

The proper procedure for tank flushing is as follows:

1. Turn off the water supply (water pump and/or city water)
2. Relieve all pressure by opening hot and cold water faucets or opening the water heater pressure-temperature relief valve
3. Drain the water heater by removing the drain plug and then reinstall the plug
4. Remove the pressure-temperature relief valve
5. With a funnel add 4 parts of white vinegar to 2 parts water until full
6. Reinstall the pressure-temperature relief valve
7. Cycle the water heater, letting it run through a complete heating cycle 4 to 5 times
8. Let the water cool down and then drain the water heater
9. Flush the water heater with fresh water for 5 minutes by using city water or the fresh water tank with the pump. You can also remove the pressure-temperature relief valve and flush through that opening
10. Reinstall the drain plug and pressure-temperature relief valve
11. Refill the water heater with water not containing sulfur. Be certain the tank is full by purging air during filling by opening a hot water faucet until you see a steady flow. Do not run the water heater until the tank is completely full.